Cristiano Midnight Posted March 7 Share Posted March 7 Bloom (created for a spring themed photo contest - Gencraft/Adobe Firefly/Fotor) 7 Link to comment Share on other sites More sharing options...
Cristiano Midnight Posted March 9 Share Posted March 9 This was an interesting experiment. I used Chat GPT to reverse engineer a friend's image, and then the results I got were amusing on the final image with my avatar lol. Here was the original: Chat GPT said this: The image displays a grayscale digital artwork depicting a sculpted male figure with a realistic, muscular build, reminiscent of classical marble statues. He has well-defined abs, pecs, and arms, with a subtle shadowing that enhances the three-dimensional effect. The man's face is in profile with chiseled features, sharp jawline, and tousled, medium-length hair. Two doves add life to the composition; one is perched gracefully on his shoulder, wings spread as if it just landed, while the other rests gently in his cupped hand. The background is a plain, light gray, putting the focus on the figure and the birds. The overall aesthetic is peaceful and harmonious. I fed that prompt with a few changes into Gencraft, and it didn't go quite as planned, but the result amused me lol. Honorable mention: 11 Link to comment Share on other sites More sharing options...
So Whimsy Posted March 10 Share Posted March 10 Uhm yes. Absolutely going red head now. 15 Link to comment Share on other sites More sharing options...
Cristiano Midnight Posted March 11 Share Posted March 11 Creating a titanic themed image for a friend inspired me to create one of my own. In the movie, "Nearer My God To Thee" is being played on the violin as the ship is sinking. The anniversary is April 15th, which will mark 112 years. The film recently also had its 25th anniversary in 2023. This was created in Gencraft with a hyperrealistic model and a watercolor style. 10 Link to comment Share on other sites More sharing options...
Otoa Kiyori Posted March 12 Share Posted March 12 Free account PhotoReal + Alchemy 7 Link to comment Share on other sites More sharing options...
Cristiano Midnight Posted March 21 Share Posted March 21 Pirata (Dall-e 3/Gencraft/Adobe Firefly): 8 Link to comment Share on other sites More sharing options...
Cristiano Midnight Posted March 21 Share Posted March 21 BTW I have recently taken over a Flickr group for SL avatars enhanced with AI: Would love to have more people submit pics to it 3 Link to comment Share on other sites More sharing options...
EnCore Mayne Posted March 21 Share Posted March 21 10 Link to comment Share on other sites More sharing options...
Cristiano Midnight Posted March 22 Share Posted March 22 An ad I did for Guy Magazine for an RP law office I have lol - Gencraft/Canva: 6 Link to comment Share on other sites More sharing options...
Cristiano Midnight Posted March 23 Share Posted March 23 I really need to stop getting sucked into silly Instagram challenges: 6 Link to comment Share on other sites More sharing options...
Cristiano Midnight Posted March 25 Share Posted March 25 7 Link to comment Share on other sites More sharing options...
Istelathis Posted March 26 Share Posted March 26 So, I've moved on from easy diffusion to stable diffusion, and have been having a blast. I created this using RevAnimated I installed InstantID into Automatic1111 and used this picture (once again) as my face model and started playing around with it. The below is one of my first tries. It kind of merges both faces but I'm working on it. Then I thought I would give a statue a try I love this statue, anyway, I removed the back ground and used InstantID again Meh, it is a work in progress, but still a lot of fun. 9 1 Link to comment Share on other sites More sharing options...
Cristiano Midnight Posted March 27 Share Posted March 27 Recently I was called a cosmos betraying fiend by a lunatic who did a drive by on my forums the day after the infamous blog post recently dropped, and I liked the name so much I made it my title on my site. I am a benevolent Thanos: 6 Link to comment Share on other sites More sharing options...
Cristiano Midnight Posted March 30 Share Posted March 30 This is one of my favorite challenge images I have done. The creepy part is I did not prompt for the man in the background, so it made it extra scary: 6 Link to comment Share on other sites More sharing options...
Cristiano Midnight Posted April 3 Share Posted April 3 Gencraft/Firefly 6 Link to comment Share on other sites More sharing options...
Lyric Demina Posted April 4 Share Posted April 4 This was fun. And it didn't endow me with six fingers LOL 8 Link to comment Share on other sites More sharing options...
Lyric Demina Posted April 4 Share Posted April 4 On 3/25/2024 at 9:20 PM, Istelathis said: So, I've moved on from easy diffusion to stable diffusion, and have been having a blast. I created this using RevAnimated I installed InstantID into Automatic1111 and used this picture (once again) as my face model and started playing around with it. The below is one of my first tries. It kind of merges both faces but I'm working on it. Then I thought I would give a statue a try I love this statue, anyway, I removed the back ground and used InstantID again Meh, it is a work in progress, but still a lot of fun. Magnificent! 2 1 Link to comment Share on other sites More sharing options...
Cristiano Midnight Posted April 6 Share Posted April 6 Created with Gencraft and expanded with Adobe Firefly: 6 Link to comment Share on other sites More sharing options...
ValKalAstra Posted April 7 Share Posted April 7 (edited) Someone asked me how I made an earlier image in the thread and truthfully, I can't remember the precise parameters I used last time as it has been a while. The second best thing I can do is walk through the general process of it. I am going to re-use the same base image like I used before and turn it into an Anime picture (cursed hands included, thank you Stable Diffusion :P). I'm fully aware that there are now ready made solutions for this kind of deal but this is for the folks that want to do things by hand or understand what goes on behind the scenes and don't feel like forking over money. Base requirements: Either A1111 webui or SD.Forge webui. The latter recommended. The following extensions: ADetailer, SegmentAnything (optional, you can just do the masking by hand). That last one is what I want to start with. With the grey background, we can easily use SegmentAnything to create a mask for us. Red spot = I want this gone. Segment Anything will create a mask based on positive and negative points. No settings needed yet, just fire away, get your mask and put it into "Inpaint Upload". Now is when we start to configure things. To start with, doesn't matter whether you are using a 1.5 or SDXL checkpoint. What's important is the resolution. 1.5 was made for resolutions of 512x512 and SDXL for 1024x1024. You can stretch these somewhat but deviate too far and you'll get a lot of halucinations. Rule of thumb: Start low resolution, upscale finished picture. For my purposes, the image was already cropped to 823x1216 from the last time I did this. Then I set the denoise to a value fo 1. Yes, 1. For the prompt I gave it something like the usual prompt vomit people use: "concept art forest . digital artwork, illustrative, painterly, matte painting, highly detailed" and a negative prompt of "photo, photorealistic, realism, ugly". This gave me the following result: Not very anime yet but we've transplanted my character into a painted anime background. There are visible artefacts around the hair and if I were to inclined, I could clean those up in photoshop. From there it was just a matter of running a fairly medium denoise on the whole picture. Thus I sent the result to Image 2 Image and used the deepbooru autotagging to give me a description, which I then further tweaked: "1girl, freckles, against tree, bamboo, bamboo forest, bare tree, breasts, brown hair, cleavage, collarbone, crow, denim, earrings, foliage, forest, glasses, grass, green eyes, jewelry, jungle, lips, looking at viewer, medium breasts, nail polish, nature, outdoors, palm tree, park, plant, short hair, skirt, solo, standing, tree, concept art forest . digital artwork, illustrative, painterly, matte painting, highly detailed" with "photo, photorealistic, realism, ugly" as the negative prompt. Denoise was at... honestly I forgot already. It was likely somewhat around 0.45 or 0.35, depending on how much I wanted the image to change. I then turned on Adetailer. In the default configuration, it will make a second pass on the face, fixing most of the issues in one go. From there, I ran a few generations until I got one that was good enough. If I wanted to, I could then use inpainting to fix the hands, maybe with the meshgraphformer model as that creates 3d replica of hands to use as a basis. It's all a bit fiddly and time consuming and with a pose like this, Stable Diffusion gets veeeery thirsty. After a few attempts that resulted in dangerously airborne skirts, I figured it's good enough. Usually I'm much more likely to just throw it into photoshop and do it by hand quick. Which I didn't do here to demonstrate the result. Cursed fingers included. And that's it. In short: Mask out the background. Generate background with prompts. Run an Img2Img pass on the result with prompts for background AND character as well as a mid level denoise. Hope this was helpful. The earlier picture from me using the same base was made much in a similar way. Edited April 7 by ValKalAstra 8 1 Link to comment Share on other sites More sharing options...
Cristiano Midnight Posted April 8 Share Posted April 8 More challenges for Instagram….gencraft and adobe firefly 6 Link to comment Share on other sites More sharing options...
taisiyakarpenko Posted April 15 Share Posted April 15 8 Link to comment Share on other sites More sharing options...
Canuck01 Posted April 23 Share Posted April 23 Just messing around, but so far is seems that A.I has a wee bit of an issue with freckles... and fingers! 🙂 7 2 Link to comment Share on other sites More sharing options...
Cristiano Midnight Posted April 27 Share Posted April 27 My boo ❤️ 8 Link to comment Share on other sites More sharing options...
VaelFaye Posted May 2 Share Posted May 2 (edited) So I goofed around a bit with something called dezgo image-to-image and wound up with some… interestingly generated pics. 😅 The original image above (raw snapshot inworld): ☝️ First try. I think the generator was a tad confused. 🤔 I’m quite fascinated by how it interprets the chest tattoos on my avi. This is probably my favorite one out of the bunch.👆 Oh my. 🌑👄🥚 I find this one strangely endearing!! 😆 I can’t explain why, I think I’m just weird like that. BONUS! The face I make to my partner when they want me to try drinking tea with milk in it. 😬 Edited May 2 by VaelFaye 5 Link to comment Share on other sites More sharing options...
VaelFaye Posted May 2 Share Posted May 2 I did one more just to satisfy my curiosity. Original inworld snapshot below: 👇 The result: Purr. I like this one. A LOT. It reminds me of an old (pre mesh) avi I had put together years ago. I might have to dig around in my closet to find it now. 👀 4 Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now