SandorWren Posted January 10 Author Share Posted January 10 I made Caitlin's vanity mirror work. Here's the link to the tutorial I found: 13 1 Link to comment Share on other sites More sharing options...
Istelathis Posted January 10 Share Posted January 10 I spent several hours wandering around mainland by foot, coming across a bunch of neat parcels and fun places. I never did find the older builds I was looking for. I took a ton of pictures though, it was all very scenic. I think this is one of the older welcome areas, so I did find one older build. After all of that walking, I was feeling a little thirsty so I thought I would try my luck with a long island iced tea.. this time I thought I would outfit myself with a little artillery in the event that Anubis did not want to cooperate. I even put on a cyborg avatar, I had to keep it real with a plaid tube top though. It was a tight fit, but I managed to get into Helios. Hopefully, he will comply. 14 Link to comment Share on other sites More sharing options...
SodaGnome Posted January 10 Share Posted January 10 i think i have hair from peaky blinders 11 Link to comment Share on other sites More sharing options...
Shiera Kealoha Posted January 10 Share Posted January 10 (edited) can always count on my bff for the lofi chill Edited January 10 by Shiera Kealoha 11 Link to comment Share on other sites More sharing options...
PheebyKatz Posted January 10 Share Posted January 10 10 Link to comment Share on other sites More sharing options...
PheebyKatz Posted January 10 Share Posted January 10 11 Link to comment Share on other sites More sharing options...
JeromFranzic Posted January 10 Share Posted January 10 11 Link to comment Share on other sites More sharing options...
Leora Greenwood Posted January 10 Share Posted January 10 1 hour ago, PheebyKatz said: Where? 2 Link to comment Share on other sites More sharing options...
Cinnamon Mistwood Posted January 10 Share Posted January 10 We all need a laugh, right? I spent 20 minutes trying to figure out why my old skybox had a weird light colored square in the middle of the floor. That's never been there before. Was this some weirdness from the new PBR viewer I was using? What the heck? Click this? Select that face? Select a linked part? Check all the textures? Did I put a semi-transparent prim down for some reason? I have no idea. Wait for it, though... Apparently, shadows and projectors were on by default. I never turn them on with the other viewers unless I was taking a pic. This was light shining into the opening on top of the skybox. Yep... *gets another cup of coffee* 4 5 Link to comment Share on other sites More sharing options...
SandorWren Posted January 10 Author Share Posted January 10 1 hour ago, Cinnamon Mistwood said: We all need a laugh, right? I spent 20 minutes trying to figure out why my old skybox had a weird light colored square in the middle of the floor. That's never been there before. Was this some weirdness from the new PBR viewer I was using? What the heck? Click this? Select that face? Select a linked part? Check all the textures? Did I put a semi-transparent prim down for some reason? I have no idea. Wait for it, though... Apparently, shadows and projectors were on by default. I never turn them on with the other viewers unless I was taking a pic. This was light shining into the opening on top of the skybox. Yep... *gets another cup of coffee* I always have shadows and projectors turned on by default. I've never seen that square before. It might have something to with the settings combined with PBR. Link to comment Share on other sites More sharing options...
Scylla Rhiadra Posted January 10 Share Posted January 10 (edited) 1 hour ago, Cinnamon Mistwood said: We all need a laugh, right? I spent 20 minutes trying to figure out why my old skybox had a weird light colored square in the middle of the floor. That's never been there before. Was this some weirdness from the new PBR viewer I was using? What the heck? Click this? Select that face? Select a linked part? Check all the textures? Did I put a semi-transparent prim down for some reason? I have no idea. Wait for it, though... Apparently, shadows and projectors were on by default. I never turn them on with the other viewers unless I was taking a pic. This was light shining into the opening on top of the skybox. Yep... *gets another cup of coffee* This looks like the results of a reflection probe. Are you using a PBR-enabled viewer? ETA: Reread your post, and you are using a PBR viewer. Ordinarily, I'd lay money this is from a reflection probe, but if it's not a pretty new skybox, that seems unlikely. Have you tried highlighting transparent to see if there is an object corresponding to the size and shape of the anomaly, or showing reflection probes? ETA YET AGAIN: God, I really need to read more carefully. Ok, you solved it: it's a skylight. /me goes off to get a coffee, which clearly she really needs. Edited January 10 by Scylla Rhiadra 2 1 Link to comment Share on other sites More sharing options...
SandorWren Posted January 11 Author Share Posted January 11 13 minutes ago, Scylla Rhiadra said: This looks like the results of a reflection probe. Are you using a PBR-enabled viewer? ETA: Reread your post, and you are using a PBR viewer. Ordinarily, I'd lay money this is from a reflection probe, but if it's not a pretty new skybox, that seems unlikely. Have you tried highlighting transparent to see if there is an object corresponding to the size and shape of the anomaly, or showing reflection probes? It could also be a from a simple prim with light emitting from only one face, and focussed. I have used that technique many times. 2 Link to comment Share on other sites More sharing options...
Scylla Rhiadra Posted January 11 Share Posted January 11 7 minutes ago, Bagnu said: It could also be a from a simple prim with light emitting from only one face, and focussed. I have used that technique many times. It could be but it sounds as though she solved it? 1 hour ago, Cinnamon Mistwood said: This was light shining into the opening on top of the skybox. Same difference as a projector, really. I thought (before reading the last bit of her post) that it might be reflection probe because I've seen similar effects from them in my own experiments. But Occam's Razor wins again. 3 Link to comment Share on other sites More sharing options...
Leora Greenwood Posted January 11 Share Posted January 11 I am tired of the hair and the makeup and the costumes......... I just want to jump on a ride and go........... and never look back............ 10 Link to comment Share on other sites More sharing options...
SandorWren Posted January 11 Author Share Posted January 11 (edited) 1 hour ago, Scylla Rhiadra said: It could be but it sounds as though she solved it? Same difference as a projector, really. I thought (before reading the last bit of her post) that it might be reflection probe because I've seen similar effects from them in my own experiments. But Occam's Razor wins again. It IS the skylight. We experimented to check. My FS PBR alpha didn't show the shadows and projectors at first. I had to switch my preset, and then switch back to see everything. But it IS an alpha. Edited January 11 by Bagnu 2 Link to comment Share on other sites More sharing options...
Scylla Rhiadra Posted January 11 Share Posted January 11 3 hours ago, Leora Greenwood said: I am tired of the hair and the makeup and the costumes Are you mad, woman??? Someone call for assistance! This person needs an intervention now!!!! 5 Link to comment Share on other sites More sharing options...
Cinnamon Mistwood Posted January 11 Share Posted January 11 5 hours ago, Scylla Rhiadra said: But Occam's Razor wins again. Yes, I was trying ALL the things and it was the freaking SL sun. Gawd! 2 2 Link to comment Share on other sites More sharing options...
SandorWren Posted January 12 Author Share Posted January 12 (edited) The cube on the left is from a PBR material I made in Adobe Substance Sampler. I had to use GLTF packer to be able to import the material into SL. The second is standard, with shine upped just a bit, to match the top of the PBR based cube.. The two pics are under different lighting. I can't remember the EEP settings. I took these pics in the Beta Grid. Edited January 12 by Bagnu 6 Link to comment Share on other sites More sharing options...
Scylla Rhiadra Posted January 12 Share Posted January 12 (edited) 28 minutes ago, Bagnu said: The cube on the left is from a PBR material I made in Adobe Substance Sampler. I had to use GLTF packer to be able to import the material into SL. The second is standard, with shine upped just a bit, to match the top of the PBR based cube.. The two pics are under different lighting. I can't remember the EEP settings. I took these pics in the Beta Grid. Wow. I gotta say -- and this reflects on PBR rather than your abilities in Substance Maker -- I think the legacy textures look better in both pics. The first cube in the second pic has that weird blurry covered-in-vasoline look that I see so much in the PBR viewers under certain common EEP settings. I'm sorry, but PBR continues to underwhelm me. Edited January 12 by Scylla Rhiadra 5 Link to comment Share on other sites More sharing options...
PheebyKatz Posted January 12 Share Posted January 12 (edited) On 1/10/2024 at 6:47 AM, Leora Greenwood said: Where? "Hello Kitty Waterpark Astralia" in Places Search. It's a whole Hello-Kitty-themed region, the waterpark is just part of it. Careful though, last time I got there via Search, I ended up in the ocean outside, lol. I think they forgot to reset their landing point. Just find a nice spot and take a landmark, yadda yadda. It's literally my favorite region besides my home sim, and the two places are nothing alike at all. XD Edited January 12 by PheebyKatz 2 2 Link to comment Share on other sites More sharing options...
SandorWren Posted January 12 Author Share Posted January 12 15 minutes ago, Scylla Rhiadra said: Wow. I gotta say -- and this reflects on PBR rather than your abilities in Substance Maker -- I think the legacy textures look better in both pics. The first cube in the second pic has that weird blurry covered-in-vasoline look that I see so much in the PBR viewers under certain common EEP settings. I'm sorry, but PBR continues to underwhelm me. It's the same "material" on both cubes, except the first one has more options with PBR. The second has the base texture, normals, and specularity only. But I did up the shine, which to me makes it look worse. I agree with you that the legacy texture looks better. I'm feeling that until everything in SL has a PBR material, we are going to have to pick and choose when and where to use the materials. I also think we need to experiment more before we really can see what's possible. 1 Link to comment Share on other sites More sharing options...
Scylla Rhiadra Posted January 12 Share Posted January 12 9 minutes ago, Bagnu said: It's the same "material" on both cubes, except the first one has more options with PBR. The second has the base texture, normals, and specularity only. But I did up the shine, which to me makes it look worse. I agree with you that the legacy texture looks better. I'm feeling that until everything in SL has a PBR material, we are going to have to pick and choose when and where to use the materials. I also think we need to experiment more before we really can see what's possible. The difference I assume is less the additional materials in the PBR than the different rendering system. I've also found that legacy textures often don't look as nice in the PBR viewers, although that's less pronounced. To repeat something I've said before, I think the new rendering system has broken the old EEP settings. Hence the necessity of creating a brand new "Midday" setting just for PBR. I think they need to do that for many of the library EEPs, especially the brighter ones. 1 Link to comment Share on other sites More sharing options...
SandorWren Posted January 12 Author Share Posted January 12 (edited) 39 minutes ago, Scylla Rhiadra said: The difference I assume is less the additional materials in the PBR than the different rendering system. I've also found that legacy textures often don't look as nice in the PBR viewers, although that's less pronounced. To repeat something I've said before, I think the new rendering system has broken the old EEP settings. Hence the necessity of creating a brand new "Midday" setting just for PBR. I think they need to do that for many of the library EEPs, especially the brighter ones. I can't comment on the new rendering system. I don't know anything about it. But I don't know how to use the probes in SL other than to create a mirror. They are normally used to create a lighting environment in a 3d modeling program. They might be necessary in SL to do that too, to prevent the vaseline look. I'm just guessing. Also, geometry affects everything too. I used a simple cube for testing. Things could look vastly different with more complex geometry. Edited January 12 by Bagnu Link to comment Share on other sites More sharing options...
Scylla Rhiadra Posted January 12 Share Posted January 12 (edited) 1 hour ago, Bagnu said: But I don't know how to use the probes in SL other than to create a mirror. They are normally used to create a lighting environment in a 3d modeling program. They might be necessary in SL to do that too, to prevent the vaseline look. I'm just guessing. Reflection probes have relatively few parameters to play with in the current system: shape (box or sphere), "dynamics" (will it capture "skinned" objects like avatars in reflections), and "near clip" (if there is an object or something in the middle you don't want captured in reflections, as for instance a central pillar). The one that really impacts on lighting is "ambiance," which allows you to adjust the amount of "ambient" i.e., "reflected" light that appears within the probe. The value of the ambiance determines whether, for instance, the interior of the probe is darker than the exterior EEP lighting: it can reduce the amount of lighting from the EEP (and determines how much of this blends with local lighting -- projectors and point lights) but it doesn't change the quality of the light. If the ambient lighting is lower within the probe, that will likely reduce the "shininess" just by virtue of the fact that there is less light reflecting off the surface. But it doesn't really change the effect. All you're really doing is making it darker. The other thing is that, for the vast majority of instances, reflection probes are only going to be applied to interior spaces. I can imagine rare cases where you might want to apply them to an exterior space, but generally you're expected to use EEP settings for that instead. 1 hour ago, Bagnu said: Also, geometry affects everything too. I used a simple cube for testing. Things could look vastly different with more complex geometry. Maybe? I've never heard this suggested, but I suppose it's possible? Edited January 12 by Scylla Rhiadra 2 1 Link to comment Share on other sites More sharing options...
PheebyKatz Posted January 12 Share Posted January 12 Hanging out with Mr. Arik. 10 Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now