Kia Kiyori Posted February 16, 2018 Share Posted February 16, 2018 (edited) I'm using the latest FS Viewer and have been taking pics using DoF without a problem - until now. About an hour ago, I had a shot all lined up, DoF was absolutely perfect with the focal point being beautifully sharp and a perfectly subtle blurred background. Then I received a sudden request from a friend to tp them to my location, so rather than taking the snap quickly, I dropped it, thinking I'll set it up again later, which I've often done without issue. Wrong. No matter what I do, I can't get the DoF working again. Both the focal point and the background are either as sharp as a tack, or hopelessly blurred. Perhaps I've been going over and over my settings for too long (been at this location for over an hour now trying to work out why DoF is misbehaving) and have gone over and over old how-to posts, which contain nothing that I didn't already know and haven't already checked. Have tried messing around with the FOV, Foc Length, CoC and the Resolution with no success whatsoever. Is it just me, or are there times when it just messes up and there's nothing you can do but wait? Edited February 16, 2018 by AnyaJurelle typo Link to comment Share on other sites More sharing options...
Resi Pfeffer Posted February 16, 2018 Share Posted February 16, 2018 Have you tried to reset every single value to its defaults using the "D" buttons? 1 Link to comment Share on other sites More sharing options...
Kia Kiyori Posted February 16, 2018 Author Share Posted February 16, 2018 Hi Resi - thanks for replying. Yes, I got into the habit of resetting everything to default the moment I'm done with a shoot. Link to comment Share on other sites More sharing options...
Kia Kiyori Posted February 17, 2018 Author Share Posted February 17, 2018 Updated graphics card - issue still persists with DoF. Had a Windows 10 update two or three days ago, but I don't think that's to blame (for a change), given that it was working perfectly from the update until last night. Pulling my hair out now...might try banging my head on a brick wall next... Link to comment Share on other sites More sharing options...
Kia Kiyori Posted February 18, 2018 Author Share Posted February 18, 2018 Perhaps more information might help someone spot what might be the problem with DoF suddenly going dead as a door nail. Specs: CPU: Intel(R) Core(TM) i7-5500U CPU @ 2.40GHz (2396.52 MHz) Memory: 8095 MB OS Version: Microsoft Windows 10 64-bit (Build 16299) Graphics Card Vendor: NVIDIA Corporation Graphics Card: GeForce 820M/PCIe/SSE2 Windows Graphics Driver Version: 23.21.13.9077 OpenGL Version: 4.6.0 NVIDIA 390.77 RestrainedLove API: (disabled) libcurl Version: libcurl/7.47.0 OpenSSL/1.0.1i zlib/1.2.8 J2C Decoder Version: KDU v7.9.1 Audio Driver Version: FMOD Ex 4.44.61 LLCEFLib/CEF Version: 1.5.3-(CEF-WIN-3.2526.1347-32) LibVLC Version: 2.2.4 Voice Server Version: Not Connected Settings mode: Firestorm Viewer Skin: Firestorm (Dark) Window size: 1366x715 px Font Used: Deja Vu (96 dpi) Font Size Adjustment: 0 pt UI Scaling: 1 Draw distance: 32 m Bandwidth: 550 kbit/s LOD factor: 4 Render quality: Medium-Low (2/7) Advanced Lighting Model: No Texture memory: 1024 MB (1) VFS (cache) creation time (UTC): unknown Built with MSVC version 1800 Packets Lost: 466/140,455 (0.3%) February 18 2018 01:02:43 SLT Example: Here's three pics just taken to demonstrate what I mean - you'll see that the only thing I'm able to change is light and shadows, nothing else: Really hope someone might know what's causing this; have been over my settings again and again, but can't spot a blessed thing. Link to comment Share on other sites More sharing options...
Kia Kiyori Posted February 26, 2018 Author Share Posted February 26, 2018 Eleven days, one support ticket, three clean installs, several hours of peppering, nagging, hassling and hissing at Google with umpteen questions while checking and double checking settings - silence reigns supreme - except for a single notification five days ago that the support ticket was buried moved (sorry - warped sense of humour - couldn't resist). Some months ago I had a graphics problem with water when taking photos in ultra settings; Whirly knew exactly what it was (she needs to be cloned because if Whirly doesn't know something, then it isn't worth knowing) and said it was a bug that only two people noticed - I was one of them. She's a genius and got me back up and running within minutes right when I was beginning to think I'd lost my marbles. Welp - marbles are on the move again and am only adding a comment here to keep the thread from vanishing into obscurity. Although it would be heartbreaking to hear that my machine has reached it's use-by date already, I'd rather know than keep running around in circles like a headless chicken. *queue sound of crickets* /end wailing and gnashing of teeth 1 Link to comment Share on other sites More sharing options...
Chic Aeon Posted February 26, 2018 Share Posted February 26, 2018 (edited) Any chance you have your build menu open and minimized? DOF disappears with build "active". There may be some other windows that negate DOF also, but build is the only one that has been an issue for me. Edited February 26, 2018 by Chic Aeon Link to comment Share on other sites More sharing options...
Kia Kiyori Posted February 26, 2018 Author Share Posted February 26, 2018 Thank you for replying, Chic. No, I'm a real fussy thing when it comes to details like that. Link to comment Share on other sites More sharing options...
Chic Aeon Posted March 9, 2018 Share Posted March 9, 2018 On 2/26/2018 at 11:49 AM, AnyaJurelle said: Thank you for replying, Chic. No, I'm a real fussy thing when it comes to details like that. Just wanted to let you know that I have been having your same issue. DOF just 'quits' and I can't get it back. Another session it will work fine or for awhile. I have nothing open that would cause a problem, so there is an issue. And I am using the latest FS viewer also, likely that is the problem. Seeing if it does the same thing with another viewer might be wise. I don't use DOF all that often so not a huge deal. Just wanted to let you know you are not alone. Link to comment Share on other sites More sharing options...
Kia Kiyori Posted March 9, 2018 Author Share Posted March 9, 2018 27 minutes ago, Chic Aeon said: Just wanted to let you know that I have been having your same issue. DOF just 'quits' and I can't get it back. Another session it will work fine or for awhile. I have nothing open that would cause a problem, so there is an issue. And I am using the latest FS viewer also, likely that is the problem. Seeing if it does the same thing with another viewer might be wise. I don't use DOF all that often so not a huge deal. Just wanted to let you know you are not alone. Thank you very much, Chic - I really appreciate that. Have been looking at others' photos in Flickr and occasionally spotting similar issues where it looks (at least, to me) like some of their DoF's seem to be a bit McGoo as well, so defs seems to be something going on. Thank you so much again, Chic, for the heads up..glad I'm not losing my marbles! (was about to start looking for them, too haha) Link to comment Share on other sites More sharing options...
Rhody Spyker Posted March 17, 2021 Share Posted March 17, 2021 I'm having the same issue: no depth of field. all the setting are correct. Link to comment Share on other sites More sharing options...
Chic Aeon Posted March 17, 2021 Share Posted March 17, 2021 (edited) 1 hour ago, Rhody Spyker said: I'm having the same issue: no depth of field. all the setting are correct. This post is three years old (always good to check the date). So there is likely no connection with THEN and NOW. There WERE changes made in DOF in the new FS. Did you try and see if you have the same issues in the Linden viewer (or another viewer you have installed)? That would be a first step. Also in case I didn't say it three years ago, you can't get DOF with the BUILD menu open. That has tricked me a few times in the past. Edit: If you DID just install the new FS viewer then reading up on how the new DOF works would be a good plan. Edited March 18, 2021 by Chic Aeon punctuation 1 Link to comment Share on other sites More sharing options...
LightPoet Posted August 17, 2023 Share Posted August 17, 2023 Now we are another 2,5 years further and the DoF feature of Firestorm release 6.5.6.66221 on a MAC does not work for me. I have DoF on, I also clicked on Depth of Filed focus fools pointer and the whole picture remains blur when DoF is enabled. The background looks slightly less blur than my main subject who is right in front of the camera. I do Alt _ left click on the eye. The cursor of the mouse jumps then to another position (by coincidence still on my subject) but the focus remains blur. I am sure that this used to work before, although the focus lock (Alt + Shift + X) never worked for me. Link to comment Share on other sites More sharing options...
Recommended Posts
Please take a moment to consider if this thread is worth bumping.
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now