Daisy Starlight Posted August 13, 2018 Share Posted August 13, 2018 (edited) Hi everyone, I don't have pictures of my model atm but, I can provide close ups of the issue if my explanation isn't clear. I am trying to upload a mesh object that is shaped like the letter "L" from blender but, for some reason, when I get the model into SL, it doesn't look like an L any more but, distorted to a point where it appears some edges and vertices seem to be missing. Is there a way to fix this? Do I need more faces and edges on my model? I know this may be hard to determine since I don't have pictures of the model right now but, I hope someone is familiar with this problem. Thank you for your time!! Edited August 13, 2018 by No Fairlady heading Link to comment Share on other sites More sharing options...
ChinRey Posted August 13, 2018 Share Posted August 13, 2018 (edited) I'm not sure if I understand you right but it may sound like you are trying to upload a model with concave polys. That is, if it looks something like this: and you have the triangulate button in the export options unchecked: You will get problems not unlike what you describe. The best solution is to split the concave poly into convex quads. For an L shape single edge across is enough: The second best option is to check the triangulate button. Edited August 13, 2018 by ChinRey 1 Link to comment Share on other sites More sharing options...
Daisy Starlight Posted August 13, 2018 Author Share Posted August 13, 2018 2 hours ago, ChinRey said: I'm not sure if I understand you right but it may sound like you are trying to upload a model with concave polys. That is, if it looks something like this: and you have the triangulate button in the export options unchecked: You will get problems not unlike what you describe. The best solution is to split the concave poly into convex quads. For an L shape single edge across is enough: The second best option is to check the triangulate button. Yes! Exactly that, I'll try it shortly and see if that makes a difference. I uploaded the model to test it and was surprised that the shape took a different form. What you've described looks like it would work perfectly. Also, I didn't think to triangulate at export, I am thinking if I wanted to take it into another program to paint that would come in handy as well, thanks a ton ChinRey! Link to comment Share on other sites More sharing options...
Chic Aeon Posted August 13, 2018 Share Posted August 13, 2018 Keep in mind when you work that your shapes should be quadrilaterals (four sides but not necessarily even sides) which then get turned into triangles when the model is uploaded. You don't normally need to triangulate but you do need to think about building your model so that it is made up of those shapes. This would be a more typical way an L shaped could be made. Just another example. This one has more vertices of course; I recognize that. 1 Link to comment Share on other sites More sharing options...
Daisy Starlight Posted August 13, 2018 Author Share Posted August 13, 2018 53 minutes ago, Chic Aeon said: Keep in mind when you work that your shapes should be quadrilaterals (four sides but not necessarily even sides) which then get turned into triangles when the model is uploaded. You don't normally need to triangulate but you do need to think about building your model so that it is made up of those shapes. This would be a more typical way an L shaped could be made. Just another example. This one has more vertices of course; I recognize that. Thank you!! That brings to mind another puzzle I have been absentmindedly tackling in blender. How do I add edges to faces within a model that do not have vertices? When I use the CRTL + R method, nothing happens to the face of the object but, other subdivided parts are affected. I have resorted to using the knife tool which doesn't seem to be the best possible option in some instances since I cannot subdivide that edge anyway. I hope my description of this makes sense, thank you for any advice offered, I really appreciate it! Link to comment Share on other sites More sharing options...
ChinRey Posted August 13, 2018 Share Posted August 13, 2018 32 minutes ago, No Fairlady said: Thank you!! That brings to mind another puzzle I have been absentmindedly tackling in blender. How do I add edges to faces within a model that do not have vertices? The triangulation tool (Crl+T) is - as the name says) the common way to triangulate polys in Blender but to spilt into quads (which is what you usualy want for SL uploads), the knife tool might be just as quick. It depends on the circumstances. The knife tool is fundamentally slower to use of course but the triangulation tool often requires quite a bit of cleanup afterwards. In the end either method works just as well, it's jsut a question which is the fastest for the specific task. 1 Link to comment Share on other sites More sharing options...
ChinRey Posted August 13, 2018 Share Posted August 13, 2018 (edited) 1 hour ago, Chic Aeon said: This would be a more typical way an L shaped could be made. Just another example. This one has more vertices of course; I recognize that. It wouldn't actually surprise me if you are right. Seems some SL content creators are addicted to lag and think any excuse to add extra complexity is a good one. Edited August 13, 2018 by ChinRey 2 Link to comment Share on other sites More sharing options...
Daisy Starlight Posted August 13, 2018 Author Share Posted August 13, 2018 Just wanted to update I decided to give the upload one more try, so I reuploaded the model and clicked "generate normals" and that seemed to fix the issue. I will still add at least one or two edges to the model just incase I don't get the same luck the third time around. Thank you!! Link to comment Share on other sites More sharing options...
Recommended Posts
Please take a moment to consider if this thread is worth bumping.
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now