Rhys Goode Posted December 12, 2013 Share Posted December 12, 2013 I am using Blender 2.69, and getting a bit frustrated. I have two meshes that I want to join. Each is assigned to different material, and each has been UV unwrappped.When I joined the two meshes last week, I was left with two UV maps, and I could sort them out using the different materials, and either apply different textures to the different materials, or edit the UV map so that I could use one texture for both materials. Today, when I join the two meshes, only one of the UV maps survives. The other materiel has its UV map collapsed to a single point.I think I am doing exactly what I did last week, when joining worked fine. But today, I can only get one UV map to survive the join. Could I have changed some setting in Blender? Link to comment Share on other sites More sharing options...
Dree Eames Posted December 12, 2013 Share Posted December 12, 2013 Yes. There's been a change in version 2.69. The fix is to change both UV map names to the same name and then join. It should combine the two the way you expect. See this thread where this is discussed: http://community.secondlife.com/t5/Mesh/Why-is-texture-black/m-p/2363623#M24793 2 Link to comment Share on other sites More sharing options...
Robert Galland Posted December 12, 2013 Share Posted December 12, 2013 Thanks for that tip, Dree. That had escaped me. I only recently learned how much naming can play a factor in Blender for a variety of reasons. Naming textures, objects...UV maps! Link to comment Share on other sites More sharing options...
Rhys Goode Posted December 12, 2013 Author Share Posted December 12, 2013 Wow, I would have been stuck a long time. Thanks so much, Dree! Link to comment Share on other sites More sharing options...
Drongle McMahon Posted December 12, 2013 Share Posted December 12, 2013 Does anyone know why this was changed? It seems to me that to destroy a UV map without reason, when you could always keep it somehow, should never be a good idea. Maybe there's a sensible reason, or maybe it's a bug. What do you think? Link to comment Share on other sites More sharing options...
Dree Eames Posted December 12, 2013 Share Posted December 12, 2013 Apparently the discussion was started by Gaia Clary in Mid October : http://lists.blender.org/pipermail/bf-committers/2013-October/041926.html If you read through the follow ups to Gaia's question you will find the reasoning behind not changing this implementation. I haven't yet read to the end, so perhaps there's some compromise solution expected further down the line. Link to comment Share on other sites More sharing options...
Drongle McMahon Posted December 13, 2013 Share Posted December 13, 2013 Hmm. More like post-hoc justification than reasoning? It's quite an imposition to expect people to name maps in such a way that they will join as expected with as yet unknown other items. However, joining by index is probably even more unpredictable, and since you can't change the idexes, can be much worse because there's no way out. I think the robust solution would be to no join them at all; use the numeric postfix convention as elsewhere to deal with duplicate names, then allow explicit joining. Then an optional join-by-name setting could be added for those whose workflow would benefit. Still, at least the solution is clear. Check the names before you join to get what you need at the end. If both mesh have just the default map name (as mine nearly always do) then the behavior is unchanged. Link to comment Share on other sites More sharing options...
Pamela Galli Posted December 15, 2013 Share Posted December 15, 2013 I understood none of that discussion, no surprise there. However I quite sure that after making the same mistake of not changing names of joined meshes 99 times in a row, on the 100th I will remember to do it. :-[ Link to comment Share on other sites More sharing options...
BlackMagi Darkwatch Posted December 21, 2013 Share Posted December 21, 2013 Quote: "The fix is to change both UV map names to the same name and then join." Ok, where do I change the name of the UV maps to the same name? When I change the name in the UV editior window it appends a number to it. The default uv name is 'untitled' in Blender 2.69. I can use an older version of Blender but I'm guessing that if this is now expected behaviour then I better learn the workaround! Thanks Black Link to comment Share on other sites More sharing options...
Drongle McMahon Posted December 21, 2013 Share Posted December 21, 2013 Properties window, Obeject data tab (triangle icon), UV Maps section: Select the map in the list and rename it in the name edit box. Remember - a UV map is not an image. Its data can be represented as an image, and it can by used to fit an image onto the mapped surface, but it is not itself an image. It is just a list of 2D coordinates associated with each of the 3D vertices of an object (in SL - elsewhere it can be a bit more). Link to comment Share on other sites More sharing options...
BlackMagi Darkwatch Posted December 21, 2013 Share Posted December 21, 2013 Thank you Drongle. I think I have a different issue then as I never change the UV Map names as you’ve shown – I do however name my UV Texture names to match what is being worked on. In Blender 2.67 I make a high poly model and bake out the texture/ao etc. Make a lower poly model, unwrap and assign a new material to it. When joined I have 2 materials (as expected) 1 for highest LOD and 1 for the lowest LOD. However, it would appear that in 2.69 the second material also disappears. I could probably make the model using a single material but this is causing some major head scratching. Any thoughts? Note: I do make all the LOD models myself but for simplicity here have suggested that only 2 are made. Link to comment Share on other sites More sharing options...
Dree Eames Posted December 21, 2013 Share Posted December 21, 2013 I'm somewhat confused. What exactly are you joining? The high and low lod mesh objects? Using v. 2.69 I just took 2 objects and assigned 2 materials per object (total of 4 materials) I assigned seperate textures to each of these material face groups. Then, after confirming the UV names for each object were the same, I joined these two objects. All materials were joined and retained and each material group's assigned texture was still conrrectly assigned. So I'm not clear on what your workflow was and what you were attempting to do here. Link to comment Share on other sites More sharing options...
BlackMagi Darkwatch Posted December 21, 2013 Share Posted December 21, 2013 My bad - I hadn't applied the material to the second object so that was why the second material wasn't available in the materials list, just tried this on a 2 single cube objects with 2 uv texture maps. I am going to try this again tomorrow and if I see an issue that is not expected (as per 2.67) I will post again and ask for guidence. Thank you Black Link to comment Share on other sites More sharing options...
Drongle McMahon Posted December 22, 2013 Share Posted December 22, 2013 I'm confused too. Why join high-low LODS. They have to be separate objects both for baking high LOD detail to low LOD and for uploading to SL. Anyway, it sounds to me as if you are confusing materials and UV maps. They are not the same things and lead separate existences. A material may use a UV map to apply itself to the mesh, but that is the end of the relationship. Link to comment Share on other sites More sharing options...
BlackMagi Darkwatch Posted December 22, 2013 Share Posted December 22, 2013 Sorry guys, think I have managed to confuse myself here to… In my latest project I am using a transparent texture for the lowest LOD model. This is the same texture as was baked but with transparency. Instead of just adding a single triangle to hold the material I was adding a plane with the texture applied and scaling it down. I now realise this approach is wrong and discovered I can add the plane to the model and unwrap it without issue at the lowest LOD and just change the UV mapping. Luckily for me this is my first project with transparency. Still learning! Black Link to comment Share on other sites More sharing options...
Recommended Posts
Please take a moment to consider if this thread is worth bumping.
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now