TessaAnnaMarie

I have most of the script figured out for what i need it today. But basically i have a note card with lets call them "Cause" and "Effects"; Listed as such in the notecard... ! Cause1 ! Cause2 ! Cause3 % Effect1 % Effect2 % Effect3 I know i can tell the script to only read lines with the ! or %, and delete them using llGetSubString(strData, 2, 400) What i need to do is have the notecard read for lines that have "!" at the start, and pick a random line to read out. Just not sure how i can do this. Advice? I know the "easy" way to do this would be to have 2 notecards, one with Causes, one with Effects. But ideally i'd like to keep it inside of one notecard, as im sure it is doable - i'm just not sure how.

I'm using Avastar and Blender to make animations. Is there a way to lock a specific bone in place so that moving other parts of the skeleton won't change that bone's global position? Trying to do an animation where the Avi squats, but I can't lock the feet in place, so as I move her down the feet slide and then hard snap in the animation playback. Not 100% sure how to explain what I mean.. but if you understand.. awesome. Basically, I want to pin the Feet to 1 spot, and no matter what I do to the skeleton they will not move during pose mode.

Omg thank you so much! This did exactly what I needed, obviously I will need to do some tweaking. But it pointed me in the right direction. T-H-A-N-K!!!!! Y-O-U!!!

Thank you for this. Works wonders for moving forward. However I ran into 2 issues. vector move = llVecNorm( <-1, 0,0.0>*!(level&CONTROL_FWD) + < 1, 0,0.0>*!(level&CONTROL_BACK)+ < 0,-1,0.0>*!(level&CONTROL_LEFT)+ < 0, 1,0.0>*!(level&CONTROL_RIGHT)); vector turn = <0,-1,0>*!(level&CONTROL_ROT_LEFT)+ <0, 1,0>*!(level&CONTROL_ROT_RIGHT); if(level&CONTROL_BACK) { llSetForce(<0,0,0>,TRUE); move=-move; turn=-turn; gShoulder = <0,0,0>; } else { llSetForce((Speed*move)+<0,0,1>,TRUE); vector vel = llGetVel(); if(vel.z>0) vel.z = 0; llSetVelocity(vel,FALSE); } When I move Forward, like I said it works perfect. 1st issue: However when I click "S" or the Back arrow, I move at normal speed. 2nd issue: When I hold down the forward key, and then press the break button (Space) the avatar turns around and SPRINTS full speed. Need this to not happen. I found out I can remove all movements with llTakeControl() - Thanks for this. I did try llMovetoPos, but it interacted weirdly. I've determined I need to separate them. I'd be happy if Moving forward would slow speed and backwards would stop it. But every way I try even with llmovetopos, it just gets buggy.. then screws up the move forward.

I have tried several ways to script it myself. Looked up several forums and what not. Can someone point me in the right direction for slowing movement speed / stopping it all together? I'll be blunt, I'm looking to slow down speed similar to how RR (Real Restraints) Cuffs slow the avatar. I understand the animation side, that I need to slow the animation time / make a new one (I will be making a new one for the need that I need this for). But everything I've tried is "Clunky." If someone knows the system I am talking about and knows the right direction. I would love to be pointed in the direction so I can bring a project... or 7 I'm working to, to life.

Thanks for all the input will look over your way of doing it and see if that works for me. As for why walking while holding space, its not the intention. I'm working on creating a combat game that can hinder movement, most things are scripted out and working but wanted to tackle this monster. So its important for me to not have a way for players to over-ride it as simple as pressing the space bar. next monster to tackle is a "You can't move at all" feature, so still al long way to go.

I am working on creating a script to slow/speed up avatar movement. This is what I have so far. float IMPULSE = 2.7; default { state_entry() { llRequestPermissions(llGetOwner(), PERMISSION_TAKE_CONTROLS); llStopMoveToTarget(); } touch_start(integer total_number) { llSay(0, "Touched."); llStopMoveToTarget(); } run_time_permissions(integer perm) { if(PERMISSION_TAKE_CONTROLS & perm) { llTakeControls( CONTROL_FWD | CONTROL_BACK | CONTROL_LEFT | CONTROL_RIGHT | CONTROL_ROT_LEFT | CONTROL_ROT_RIGHT | CONTROL_UP | CONTROL_DOWN | CONTROL_LBUTTON | CONTROL_ML_LBUTTON , TRUE, TRUE); } } control(key id, integer level, integer edge) { vector v; if (level & CONTROL_FWD) v.x = -IMPULSE; else if (level & CONTROL_BACK) v.x = IMPULSE; else if (level & CONTROL_LEFT) v.y = -IMPULSE; else if (level & CONTROL_RIGHT) v.y = IMPULSE; llApplyImpulse(v, TRUE); } } This seems to work as attended. Nearly perfectly. Couple of small issues though. 1. If I raise the number above 3 when I try to walk backwards (Down arrow / "S") it will not turn my avatar around, the animation is walking forwards while the avatar is moving backwards. Any fix to this? 2. If i press my "Space bar" it will revert back to normal movement speed for as long as i hold the space bar and send me in the opposite direction (If I'm Holding "W" and click space, i will speed up and go backwards). This is my bigger issue that i need to fix, as this is just "breaking" everything I'm trying to do with the script. Note: either of these issues only happen when i go positive with the IMPULSE variable (Or slow down), if i speed up, i don't have these issues. If there is a better way to do what I'm trying to do, please let me know. Been working on this for weeks. This is the closest i have gotten.

Thank you! Some minor adjustments and yes, this works! Thank you!

Okay i have 2 lists. I'll keep it simple here. list Numbers = ["1", "2", "3", "4", "5"] list Letters = ["A", "B", "C", "D", "E"] What I need to do is check to see if something is in a list. if(msg == llListFindList(Numbers, (Numbers)msg)) { llSay(0, **this is where I need help**); } Simple. But what I need the outcome to do is use the letter that corresponds to the number. Meaning if the message is "3", the outcome will say "C". I'm pretty sure this is doable, but I can't for the life of me figure out how.

I'm looking for an experienced Rigger and Weight painter with the Legacy and Reborn Dev kits to Rig and Weight paint a few things i have made. I understand this process is not cheap, and am willing to pay a fair agreed upon price. I am somewhat familiar with the processes using blender myself and creating stuff for other games and know the work it takes. Please respond here, in Message or on Grid: TessaAnnaMarie Let me know your price and if you have a portfolio that would be wonderful to see, though not required. If you are a new rigger/weight painter but are serious about getting into the field feel free to leave a comment, i am looking to have quiet a few things made. Thank you in advance!

So this makes sense. And i know you should be right. But for some reason, my script is doing **Exactly** what i need it to do. Lol

I solved it with this integer temp = highcheck - lowcheck; integer addnumber = llFloor( llFrand( temp ) +1 ); Amount = lowcheck + addnumber; llSay(0, (string)Amount); Thank you Been fighting this part of the script all day! Lol

So this seemed to solve it from going ABOVE my high check... but now im seeing 2000's

integer highcheck = 5969 integer lowcheck = 4132; Amount = llFloor(llFrand(highcheck) + lowcheck); Can someone please explain to me... why the outcome of this line of script would be 7021? I am trying to make it pull a random number between 4132 and 5969. Can't seem to figure out what im doing wrong.

removed

Okay, i have in fact verified that it is being set as an integer. Now to send it to the other script?

So i need to send an integer from one script to another. I am using llTextBox to allow the player to enter a integer. I need to be able to pass that integer to another script in an unlinked prim. I have been using llSay + Listen, i can make objects talk to one another no problem. What i can't figure out is how to allow the script to communicated the integer. Basic run down. Cube is being click, pops up the text box. I enter 5. I can't even get that value to save as an integer.