Jump to content

conilmionome

Resident
  • Posts

    44
  • Joined

  • Last visited

Posts posted by conilmionome

  1. Hello ,  i always buy from Modulus for my straight hair, i would need some advice on shop that has more wavy or curly male hair.

     

    Thanks guys!

  2. Hi guys, switching with lelutka heads and trying lot of skins I noticed that very often the top eyelashes on the face are not defined and clear like at bottom,  also after zoom with Ctrl+0  . Can it depends from the shape or maybe graphic settings??

  3. Hi everybody, i have a small problem with phototools, i'm a beginner, sorry ! I noticed that in the windlight section, exactly above the quick presets, i no longer see the yellow bar to play with the lighting... maybe i touched something wrong, i don't know.

     

    can anyone help me to restore? thanks !

  4. Can someone help me to solve an old doubt?

    Before putting the shape that is generally found in skin of good quality, do you have to start with the default one in the head anyway? ( Default Skyler Shape, for example )

    Or by immediately inserting the shape of the skin you get the same result?

    Thanks all

  5. Hi guys, need some advice to create combo with a Lelutka Evo head. I'm looking for mature face, not too "clean" and with good level of details. 

    I would want to use Skyler or Alain.

    But which store to find that kind of skin?

    Thanks!

  6. ok, i didn't have the redelivery for my body applier. now i have and it works with bom.

    but for the skin...in the box of mine there's only applier, not tattoo layer.

    at the mainstore of not found i see that only few skins are bom compatible...mine seems not🙃

  7. 18 hours ago, Skell Dagger said:
    1. If your Not Found skin has either a system option or tattoo options, then add that first of all
    2. Check that your Victor head is v4.5. If it's not go to the Catwa store and click the redelivery terminal at the landing point. Redeliver your original purchase, unpack it, and the v4.5 update will be inside. Take off any old version of the head and HUD and wear the new versions
    3. Take off ALL alpha layers that you're wearing. Yes, you'll look a bit strange at first, but keep going...
    4. Go into the v4.5 Catwa Master HUD, the tab at the very bottom (Skins/Ears) and click the BOM button in the top right (it looks like this)
    5. Go into your Signature body's HUD > Settings tab (the 'cog' icon) and click 'BoM - Bakes on Mesh' (image here)
    6. Your Not Found BoM skin should now be showing on both your Catwa head and your Signature body
    7. Add the tattoo layer hairbase. Your avatar will turn grey for a few seconds while the layer 'bakes' onto your head. Make sure to ADD and not WEAR that tattoo, especially if your Not Found BoM skin comprises tattoo layers as well
    8. Lastly,  make sure you're wearing the Catwa Master HUD that you saved the facial hair onto, and follow the steps that I gave previously to layer the facial hair and the tattoo: apply the tattoo first (it will go onto the lower layer of the head) and then check the UPPER box on the Master HUD for each area that you saved the facial hair to (blush, lips, hairbase) and apply directly from the Master HUD

    You will find that your system eyes will now also be 'baked' onto your Catwa mesh eyes. If you want to continue using eye appliers look in your v4.5 Victor folder for something called 'CATWA ALPHA Pack [Use for BOM]'. Wear that to unpack it, and ADD the 'CATWA ALPHA EYES'. Your eyes will turn red, but that's fine. Just find your eye appliers and re-apply them and you're good to go.

    If you need any more help, just holler :)

    Ok! I only had a doubt about the first step. Basically i just had to add my skin as a layer and not applier from the beginning? My skin seems have only applier btw.

     

    However i made an attempt, but i had the classic red avi problem. I had a single alpha active ( Catwa Full Avatasr ) and i had removed it at the beginning of the procedure, later i found the box of Catwa Victor for BoM and used it. I did each step but nothing, it doesn't seem to work and i see red.

     

    I use a legacy body and not signature anyway, but i found the button in the body menu and i think i did it correctly... i don't know!

     

  8. 33 minutes ago, Skell Dagger said:

    Catwa heads are the only ones with two layers. Every other mesh head only has one, so you'd be even more stuck with another brand ;)

    You can only layer two items on a single area of the head, not three, so if all three items (hairbase, facial hair, and face tattoo) want to use the same area then that simply isn't possible, and in that case I would definitely urge you to consider the Bakes on Mesh option.

    From what you're saying, it sounds as though your hairbase has sideburns that touch on the blush area, and both your facial hair and your face tattoo need the blush layer as well. Is that correct? If so, then no, you cannot layer all of those in any way - on any brand of mesh head - using appliers alone.

    The Bakes on Mesh option will depend on which skin you're wearing. If there is a BoM update for it, then pick that up and look to see if any of the three items you want to layer (hairbase, freckles, or facial hair) come with a BoM or system tattoo option. If they do then you can get the look that you want, with a combination of BoM and appliers.

    Let me know if that's the case, and I'll walk you through doing that.

     

    thank you very much, yes it's how u explain, indeed i'm thinking about bom

    btw, i wear not found skin and body applier, it should be compatible with bom.

    a body tattoo, has layer and applier, i hadn't issues with it

    facial hair has only applier

    the face tattoo of this thread, it has only applier

    and hairbase comes with layer and applier too

  9. ok, i am sure i did everything right, but 

    i can visualize everything correctly, but there is a missing part...the piece that combinese hairbase with facial hair. this is visibile only if i follow the steps indicated without hairbases applicated. you said that catwa head has only two laters...so there aren't enough layers for everything? 

     

    sorry for the confusion skell

     

  10. 1 hour ago, Skell Dagger said:

    Catwa Bento heads (of which Victor is one) have two layers. As the name suggests, these allow you to layer two different appliers, but you need to save one of those items to the Catwa Master HUD in order to do that layering.

    1. Clear face of both tattoo and facial hair
    2. Apply the facial hair. It will default to the lower layer of your head
    3. One at a time, clear the following sections using the Master HUD: blush, lipstick, neck tattoo, hairbase. (Ensure that the LOWER button is checked when you do this.) Note down which ones the facial hair appears to be on (in other words: if a piece of it vanishes when you clear that section)
    4. Re-apply the facial hair
    5. Again in the Master HUD - and with the LOWER button still checked at the top of each, save the facial hair to the sections that you noted down
    6. Clear your face again
    7. Apply the tattoo. It will default to the lower layer of your head
    8. Go back to the Master HUD, and this time check the UPPER button on each section where you saved the facial hair. Apply the facial hair directly from the Master HUD. Because you now have the UPPER button checked, the applier will go directly onto the upper section of the head, layering over the top of the face tattoo

    This image shows you - using the old Master HUD - how to do this. The demonstration is with eyeshadow and eyeliner, but you go through exactly the same steps (just in different sections of the HUD) for anything else that you want to layer. I need to re-make that tutorial using the new v4.5 HUD, but the principle is the same, regardless.

    I am sure that someone will probably come along shortly and tell you that Bakes on Mesh is the solution to all your layering problems (and indeed it is a great solution), but the above is how to layer if you only have appliers and your facial hair and tattoo don't come with system/BoM layers. (With BoM you would also need a good quality system-style, Catwa-mapped BoM skin, so it gets a little more expensive if you go down that route and don't yet have all the BoM items that you need.)

    Thank you Skell, two things:

    - i didn't understand how to "save facial hair" and exactly in which section... 

    - what do u mean with " apply the facial hair directly from the HUD "

     

    • Like 1
  11. Hello everyone, i don't know if i'm wrong something

    It's impossible to match them correctly. In practice i can fully view my face tattoo ( face/neck ) only if the facial hair is not worn. If i try to have them both together, the tattoo is ruined, only some parts of it are seen and for example a writing is halved and goes over the eyebrow.  I use omega, where i select lower layers for hairbase and beard

     

    • Like 1
  12. Hello all, i have this problem during my demo tests:

    testing some combinations, for example Clef skin and Jake Belleza body, when i wear the shape found inside the skin to get the exact look of the photo.....the hands and arms are visibly deformed, although the face is perfectly same as it should be. Instead, if i replace the shape included in the skin with the original one of Jake's body, the oppiste happens, the body turns out to be proportionate but clearly the face does not have the exact traits of the skin i want. ( obviously i always try with the recommended head )

    Does it happen because i'm using demos? or should i just try clef skin with other bodies because maybe this combination doesn't work well? I don't understand why for example with Not Found skin  and Belleza jake everything works wonderfully, already with a demo.

     

    thanks for any help!

  13. hi guys!

    i have this problem: i purchased body applier and head applieri from Not Found, obviously of the same tone, but at the neck there is something wrong. i think it happens with the legacy body, however, with Signature i didn't notice anything strange. is there anything in the legacy hud to solve or something else? Thank you

  14. Hi, i apologize if the question turns out to be stupid but i have a long doubt: 

    then, i buy a shape suitable for my head and body, suppose daniel/gianni.

    in the catwa daniel box there are shapes, for example "Catwa Bento Gianni start your shape with me". I would like to know if this must be selected and added before replacing it with the purchased shape or if it's a useless step and the final result would be the same. My question arises because i noticed that Catwa Bento Gianni, as a shape, changes the initial appearance of the head and therefore i wondererd if the purchased shape would overlap.

     

    Thank you

×
×
  • Create New...